
Caring for brass jewelry
Brass accessories have grown increasingly popular in recent years.
While they are affordable, unplated brass accessories will tarnish quickly if you neglect to care for them.
However, caring for brass is not difficult if you know the key points.
If you are considering purchasing brass accessories, make sure to learn the key points of care before you buy.
This guide explains how to easily care for brass accessories and what to do if verdigris (green rust) develops.
Regular care is essential for brass jewelry
Unlike silver or gold, unplated brass accessories must be cared for regularly, or they will quickly develop verdigris (green rust) and deteriorate.
Once verdigris develops, it cannot be easily removed with polishing cloths sold at home centers and other stores.
Although verdigris is not toxic, if you wear jewelry with verdigris, it can firmly adhere to your clothes, hands, and fingers and be difficult to remove.
※The Ministry of Health and Welfare (now the Ministry of Health, Labour and Welfare) announced in 1984 that verdigris is not toxic.
Why brass tarnishes and verdigris develops
This applies not only to brass but to jewelry made from any material: the main causes are generally human body oils and sweat.
Therefore, wipe your jewelry with a soft cloth after wearing it and store it away.
If fingerprints are stubborn and cannot be removed by wiping lightly with a cloth, wipe them with an alcohol wipe or a tissue moistened with nail polish remover.
If left unattended, the accumulated dirt will cause the jewelry to tarnish rapidly.
How to care for brass accessories
You will need the following items for care.
- Baking soda
- Tap water
- Cotton (or paper towels or tissues)
- Toothbrush (soft-bristled)
- Cotton swabs
- Toothpick
You can care for brass accessories with just baking soda, water, and tissues.
How to care for brass jewelry and remove verdigris
1. Mix 2 tablespoons of baking soda with 1 tablespoon of tap water
The measurements are approximate, so you can use your best judgment. The mixture should be thick enough that the baking soda feels slightly gritty in the water.
2. Apply to the brass and rub gently
Apply the baking soda mixture to the brass and rub gently using cotton or a cotton swab. Avoid applying too much pressure. Use a toothbrush or toothpick for intricate details where a cotton swab will not fit.
If verdigris has just begun to appear on the surface, it can be easily removed by gently rubbing with a cotton swab dipped in baking soda.
Use caution if the jewelry has Swarovski crystals or other parts attached, as applying too much pressure may cause them to fall off.
3. Wipe off any moisture and dry thoroughly
Rinse with water, wipe off any moisture, and dry thoroughly using the cool setting on a hairdryer to ensure no moisture remains.
If verdigris has developed on plated brass accessories, the plating is peeling off. Rubbing too hard may cause even more of the plating to come off.
If the plating on brass accessories has peeled off, have a professional replate the jewelry after cleaning it.
A cotton swab is sufficient for jewelry the size of a ring, but for larger items such as bangles, using a melamine sponge or kitchen sponge can make cleaning more efficient.
If dirt (verdigris) has been left for a long time
If verdigris has covered the entire surface and been left for a long time, soak paper towels or cotton in a mixture of water and baking soda, place it on the verdigris, let the verdigris loosen, and then wipe it away carefully.
This is similar to the method of soaking paper towels in detergent and placing them on stubborn kitchen grease stains.
Verdigris itself forms to protect copper, so it is not necessarily a bad thing. However, brass is an alloy of copper and zinc, so even if the copper is protected, the zinc may corrode and leave the metal porous.
In extreme cases, the surface may look fine, but the interior may be hollow and weakened.
Given this, after loosening the dirt, use cotton to absorb the dirt and wipe it away gently to minimize the strain on the brass accessory itself.
Stubborn dirt may make you want to wipe it away forcefully, but doing so risks damaging the jewelry.
Antique brass items, in particular, are often delicately made, so rather than rubbing forcefully, soak them repeatedly and allow the verdigris to break down naturally before wiping it away. This takes time, but it is the most reliable and safest method.
Baking soda is used in food and is therefore harmless to the human body. It also does not damage the metal itself, so you can use it with confidence.
Using liquid compound
This method is best suited for items larger than brass accessories. You can also use liquid car compound sold at home centers.
Liquid compound can remove fine scratches and restore shine. Wiping it off with a soft towel creates a protective layer that significantly reduces deterioration, leaving the jewelry surprisingly beautiful.
This is a powerful method that can also be used to some extent on brass products that have tarnished to a copper color.
However, liquid compound works by slightly abrading and polishing the surface, so it may remove the plating on plated brass. (This warning is also included on the liquid compound container.)
If you do not dry the jewelry thoroughly after care, verdigris will return
Brass, in particular, tarnishes quickly when exposed to moisture, acids, and body oils, so if it gets wet, dry it thoroughly with a hairdryer.
Verdigris will quickly return if exposed to even a small amount of moisture.
Because baking soda care also involves water, be sure to dry the jewelry thoroughly after washing it.
If an accessory has parts attached with adhesive, drying it with hot air may loosen the adhesive and cause the parts to fall off, so dry it using cool air.
What not to do when caring for brass
Never use vinegar for care
Vinegar can remove dirt and verdigris, but it is not recommended.
It is not a strong acid, so it will not dissolve the metal, but it may cause discoloration and leave stains that make the jewelry look unsightly.
Discolored areas cannot be fixed simply by polishing, and even if the surface is abraded, there is no guarantee that the discoloration will be removed.
Even after verdigris is removed, oxidation (corrosion) will continue after care, and there is a risk that damage will remain in the brass itself.
Do not use boiling water
Using boiling water to care for brass accessories is strictly prohibited.
Some people may think that boiling water will quickly remove minor dirt or stickiness, but unplated brass accessories will discolor (turn copper-colored) if left in boiling water for an extended period.
If left in boiling water for too long, the discoloration will spread to every crevice, leaving you with no choice but to consult a specialist.
If you must use hot water, a bath temperature of around 41°C is recommended.
After caring for the jewelry, dry it thoroughly and store it in a resealable plastic bag to keep it away from the air.
With proper care, brass jewelry can be enjoyed for a long time.
Care for it regularly and treat it with care.


